LED Drivers (DC to DC)
1. LED Driver are available as per detail below..
(A) Input 10 to 14VDC, Output 10.5VDC @1Amp
(B) Input 6 to 27VDC, Output 30 to 40VDC @1Amp
SPECIFICATION:- |
1 |
Input Voltage |
6 to 37 V DC |
2 |
Output Power Range |
3 W to 40 W |
3 |
Line & Load regulation |
< 5 % |
4 |
Ripple & Noise |
< 2 % Peak to Peak |
5 |
Operating Temperature |
Upto 650° C |
|
-
Design to meet safety standards : IEC60950
- High frequency switching technology, higher efficiency, low power dissipation.
- Design to meet adverse Indian power conditions.
- Overload, Short Circuit and Over Temperature Protection
|
SMPS Adaptors
SMPS Adaptors are available as per detail below..
(A) Output 5VDC @ 0.5Amp
(B) Output 5VDC @ 1Amp
(C) Output 5VDC @ 2.5Amp
(D) Output 12VDC @ 0.5Amp
(E) Output 12VDC @ 1Amp
(F) Output 12VDC @ 2.5Amp
(G) Output 24VDC @ 1.5Amp
(H) Output 24VDC @ 2.5Amp
(I) Output 48VDC @ 1.25Amp
|
1 |
Input Voltage |
90 to 265 V AC |
5 |
TDH |
< 15% |
2 |
Input Frequency |
47 to 53 Hz |
6 |
Line & Load Regulation |
<5% |
3 |
Output Power Range |
3 W To 90 W |
7 |
Ripple & Noise |
<1.5% to <2.5% Peak to Peak |
4 |
Power Factor |
> 0.8 Without PFC
>0.9 With PFC |
8 |
Operating Temperature |
0 to 65° C |
|
-
Design to meet safety standards : IEC60950
- High frequency switching technology, higher efficiency, low power dissipation.
- Design to meet adverse Indian power conditions.
- Overload, Short Circuit and Over Temperature Protection
|
